•Mechanical speed: 200m/min or 300m/min

•Machine specifications: 1200mm, 1450mm, 1700mm

•Product effective width: 1200 models (600-1100mm), 1450 models (800-1350mm), 1700 models (1000- 1600mm)

•Extruder: manufactured using *chaotic mixing low-energy extruder* technology

•Extrusion rate: HL-65 extrusion rate 120kg/h; HL-80 extrusion rate 200kg/h; HL-90 extrusion rate 300kg/h (when extruding LDPE)

•Extrusion motor power: HL-65 drive motor 22kw; HL-80 drive motor 45kw; HL-90 drive motor 55kw

•Extrusion resin: LDPE, HDPE, PP, EVA, EAA and other coating grade resins

•Extrusion thickness: 6-40 p m

•Uniformity of manual die thickness: ≤ 5%

•Unwinding diameter: φ800mm or φ1000mm

•Unwinding substrate: BOPP, BOPET, BOPA, thin paper (20-100gsm)

« Interlayer unwinding diameter: φ800mm or φ 1000mm, “aluminum foil front and back high-speed fully automatic material exchange’

* Laminated unwinding substrate: BOPP PET, MCPP, MPET.

Aluminum foil, paper

*AC agent coating and oven: equipped with single and scraper wire coating rollers and a 4.5-meter oven

•Composite cooling roller diameter: φ600mm or φ800mm, jacket spiral cooling water forced heat exchange structure

•Roll diameter: φ800mm or φ1000mm

•Tension control: Fully automatic tension control for unwinding and interlayer unwinding, with a tension of 300N. Fully automatic tension control and taper control for winding, with a tension of 300N

•Control mode: human-machine interface operation, precise calculation of extrusion thickness by computer, machine linkage control

• Inverter: Imported AC digital vector control inverter

• Requirements for the complete machine workshop: length 35.5 meters, width 14.5 meters, height 5 meters